Here is a guide that will show you how to break into your car. It’s just meant to help people who are locked out of their cars or who have been asked to assist someone who is locked out of their car. The purpose of the article is also to raise awareness of the inherent flaws in-car security that criminals are already aware of. You’ll witness how easy it is to break into your own car and you will also be hopefully inspired to use some car security techniques.
Here are a few tips that you can use for breaking into your own car-
It’s as simple as hiring an automotive locksmith to learn how to break into your car quickly and with the least amount of knowledge. Any other method of unlocking your locked car will require the use of one or more tools as well as some trial and error time. You also run the risk of harming the car if you do this task alone.
The credit card method of opening a door without a key is used in buildings and it does not function on car doors. There may not be a way to break into your vehicle with a credit card, but there are techniques to open a vehicle that is similar to the credit card method.
Unlocking car doors with improvised lock picks that are made from paper clips, safety pins, or bobby pins is not suggested. Picking car locks is more difficult than picking a regular door lock. If you use improvised lock picks, you risk destroying the lock, which is more likely if you don’t know what you’re doing.
You should be able to request a technician to access your car immediately from the service number if you are a member of AAA or similar roadside assistance clubs. Some memberships also cover the cost of locksmith services. The amount can vary depending on your plan.
If you are locked out of your car, you should not notify law enforcement unless it is an emergency and unlocking the car is essential to prevent imminent physical harm. If the police are contacted via a non-emergency number in a smaller community, then they may be able to help you in opening cars.
A vehicle with a deadlock function, which disables all electrical unlocking methods until the correct key is used, needs the assistance of a professional auto locksmith. When this security function is activated, then trying to break into your vehicle on your own is no longer an option.
A single shoelace can be used to unlock a vehicle. When it comes to breaking into your car, this is the way that involves the least amount of effort and poses the least chance of causing damage to the vehicle. It does, however, need the use of post locks on your vehicle.
Post locks are upright locks that extend or retract depending on whether the car is unlocked or locked. These locks are visible from outside the vehicle, making it easy to decide if they are locked or unlocked. They’re a mainstay of antique car security, although they’re less common on modern vehicles.
You pull the post up to open a post lock. This is the fundamental principle of using a shoelace to break into your car. But first, you’ll need to modify the rope by attaching a slip knob to it.
If you don’t know how to tie a slip knot, here’s how to do it-
Make a loop with your fingers.
Reach two fingers down through the loop with your right hand.
Grip the cord on the other end of your loop with those two fingers.
Grip the side of the cord that isn’t being grasped with your left hand.
As you pull up with your right hand, pull the length down with your left.
Tighten and adjust the knot as needed.
If you’re more of a visual learner, you can also watch a video on how to tie a slip knot. However, once you’ve mastered it, you’ll tie a slip knot in the center of your shoelace. Now you must learn how to break into your car using a shoelace or other small diameter rope.
Work the tool between the frame and the door with the slip knot in the center of your rope.
Maintain a low angle on the side that tightens the knot, while holding the other length at a higher angle.
Move the loop toward the post lock by pulling the length at a high angle along the top of the door.
With the loop catch the post lock.
As you draw the rope and post upwards, tighten the slip knot.
If you lock your keys in the car, you can retrieve them back and get back on the road fast. Even if you don’t have any keys, you can still call a locksmith and have the technician replace your car keys.
This method can be used to unlock any vehicle that does not have high-security locking systems, such as a deadlock. This method will work if the buttons and lock switches inside the vehicle continue to affect the locks. Just keep in mind that if done in the wrong way, this technique can cause harm to your vehicle. With those disclaimers out of the way, wedging and probing is the quickest and most dependable way to open a car door. Although professional tools are required to open a locked car in this way, the wedge can be made of wood or plastic as long as it is wedge-shaped. A strong plastic door stop will also work.
The long reach tool can be anything as long as it fits through the gap and is long enough to manipulate the inner buttons. This tool should be malleable so that it can be twisted to fit around obstructions, but it should also be strong enough to push without losing its shape. With your equipment in hand, follow these basic steps to break into your car with a wedge and probe-
Place your wedge in the door’s upper corner (the side that opens).
To avoid scuffing paint or plastic, wrap it in a cloth.
Insert the wedge far enough into the door gap to allow your reach tool to fit.
The greater the distance between the two points, the greater the risk of injury.
From here, work quickly to avoid the door becoming jammed for an extended amount of time.
Place the reach tool in the gap and aim it at the lock buttons or switches.
Work fast to get the inside locks to unlock.
While this process must be completed fast, it must also be completed smoothly. With wild misses from your reach tool, you should not quickly slam in wedges or scuff up the inside door panel. Make sure to compare the cost of a locksmith to the cost of repairing damage caused by amateurs.
You should be able to contact a locksmith if you are reading this page. There is no chance of damage to your vehicle if you contact a qualified mobile locksmith. You’ll need to contact a locksmith if your car has been locked. How to break into your own automobile once it has become jammed may include lock picking, which is not a DIY project. Drilling may be required if your keys are locked in the trunk of your vehicle during a deadlock.
There are a few very particular and unusual scenarios in which a drill is required to break into your car. Before beginning work, the locksmith will explain how the vehicle’s damage will be isolated to a small, coverable region. Before service begins, this controlled damage must be agreed upon. A locksmith can usually open a vehicle in a matter of minutes with no evidence of any tools being used. If you’ve lost your car keys and don’t have a spare, a locksmith can produce new ones from scratch and get you back on the road once they’ve figured out how to get into your vehicle.
You become more aware of how insecure most vehicles are after knowing how to break into them. Even if you know how to break into your own automobile in these simple ways, it may be too much for you, or you may lack the necessary tools. Call a locksmith if you can’t tie a slip knot, your reach tool is too short, your wedge keeps slipping, or you have any other problems. Prime Locksmith has a large number of automotive technicians across the country, so check to see if we’re in your area!